Showing posts with label CMTI Apprentice Project Fellow MCQ MULTIPLE CHOICE QUESTIONS (MCQ). Show all posts
Showing posts with label CMTI Apprentice Project Fellow MCQ MULTIPLE CHOICE QUESTIONS (MCQ). Show all posts

Tuesday, May 7, 2019

WIREMAN MULTIPLE CHOICE QUESTIONS (MCQ)

WIREMAN MULTIPLE CHOICE QUESTIONS                                  (MCQ)
The type of switch used in Staircase wiring is............
(a) Rotary Switch
(b) Push Button
(c) Two Way Switch
(d) One Way Switch
Answer : (c) Two Way Switch

When the core becomes magnetically saturated,
the increase in magnetic field strength H
(a) Enhances B drastically
(b) Decreases the permeability of the core
(c) Increases the permeability of the core
(d) Almost has no effect on magnetic induction B.
Answer : (d) Almost has no effect on magnetic induction B.

The nominal voltage of Lead-acid cell in an open
circuit is approximately…….
(a) 2 Volts
(b) 1.5 Volts
(c) 1,25 Volts
(d) 2.5 Volts
Answer : (a) 2 Volts

While selecting a fixed value resistor, its main
specifications to be considered are....
(a) Voltage, wattage and tolerance in percents.
(b) Voltage, Current and Size
(c) Value in Ohms, Voltage and size
(d) Value in Ohms, Wattage and tolerance of its value
Answer : (d) Value in Ohms, Wattage and
                       tolerance of its value
rrbtechquestions.blogspot.com

The specific gravity of a Lead-acid battery's
electrolyte is measured by
(a) Hydrometer
(b) Barometer
(c) Hygrometer
(d) Pyrometer
Answer : (a) Hydrometer

Power factor of a pure resistive circuit is.................
(a) Zero
(b) Lagging
(c) Leading
(d) Unity
Answer : (d) Unity

The function of the choke coil in fluorescent
lamp circuit is.......
(a) Only to limit the operating current
(b) Only to produce starting voltage impulse
(c) To produce starting voltage impulse and to
      limit the operating current *
(d) To limit the heating cuitent of filaments
Answer : (c) To produce starting voltage impulse
                      and to limit the operating current
rrbtechquestions.blogspot.com

AC mains supply in India has the frequency of..........
(a) 100 Hz
(b) 60Hz
(c) 50 Hz
(d) 40Hz
Answer : (c) 50 Hz

The fixed value Carbon Resistors are generally
not more than......Watts.
(a) 10
(b) 6
(c) 4
(d) 2
Answer : (d) 2

In an Inductive AC circuit, current.,
(a) Lags behind the voltage by 180°
(b) Leads the Voltage by 90u
(c) Lags behind the Voltage by 90°
(d) Is in phase with the Voltage
Answer : (c) Lags behind the Voltage by 90°


WIREMAN MULTIPLE CHOICE QUESTIONS (MCQ)

WIREMAN MULTIPLE CHOICE QUESTIONS (MCQ)

When a capacitor is charged through a DC supply
source for infinite time, the final current through it is -
(a) Determined by the resistor
(b) Half of the initial current
(c) Infinite
(d) Zero
Answer :  (d) Zero
rrbtechquestions.blogspot.com

The Electronic grade solder has a Tin: Lead ratio of....
(a) 40:60
(b) 60:40
(c) 35:65
(d) 70:30
Answer :  (b) 60:40

Generally battery containers are made with -
(a) Hard Rubber
(b) Hard Plastic
(c) Polypropylene
(d) None of these
Answer :  (c) Polypropylene

The sheath is used in cables to.................
(a) Provide strength to the cable
(b) Provide proper insulation
(c) Prevent moisture from entering the cable
(d) Avoid chances of corrosion on strands
Answer :  (a) Provide strength to the cable
rrbtechquestions.blogspot.com

Load of an electrical network determines -
(a) Resistance
(b) Impedance
(c) Current
(d) Voltage
Answer : (c) Current

The capacitors are used across AC supply for.................
(a) Power improvement
(b) Power factor improvement
(c) Current improvement
(d) Voltage improvement
Answer : (b) Power factor improvement

Which of the following bulbs will have the least resistance?
(a) 230 V, 60 W
(b) 230 V, 100 W
(c) 115 V.60 W
(d) 115 V, 100 W
Answer : (d) 115 V, 100 W

The phenomenon of induced magnetism lagging
behind the magnetizing force is known as ……
(a) Eddy currents
(b) Hysteresis
(c) Reluctance
(d) Permeability
Answer : (b) Hysteresis
rrbtechquestions.blogspot.com

The..............are tools used for bending, seaming and
forming of sheet metal that cannot be done on any
regular machine
(a) Snips
(b) Vices
(c) Stakes
(d) Centre Punch
Answer : (c) Stakes

In full wave rectifiers the current rating of each
diode is ...... to /of the DC output current.
(a) Equal
(b) Half
(c) Double
(d) Three times
Answer : (b) Half


2016 JULY REFRIGERATION AND AIR CONDITIONING THEORY SEMESTER-II

2016 JULY  REFRIGERATION AND  AIR CONDITIONING  THEORY  SEMESTER-II 1. The compressor motor in a hermetically sealed compressor ...